CSUN  Wordmark
Page Description

The following page is a three column layout with a header that contains a quicklinks jump menu and the search CSUN function. Page sections are identified with headers. The footer contains update, contact and emergency information.

Laboratory for Sustainable and Additive Manufacturing

.

Journal Papers

  1. Yangzhi Zhu, Reihaneh Haghniaz, Martin C. Hartel, Shenghan Guan, Jamal Bahari, Zijie Li, Avijit Baidya, Ke Cao, Xiaoxiang Gao, Zhuohong Wu, Xuanbing Cheng, Bingbing Li, Sam Emaminejad, Paul S. Weiss, and Ali Khademhosseini*, 2022, “A Breathable, Passive-Cooling, Non-Inflammatory, and Biodegradable Aerogel Electronics for Wearable Physical-Electrophysiological-Chemical Analysis”, Advanced Materials (2021 Impact Factor: 32.086).
  2. Marcela Britto de Paiva*, Giovana Sant'Ana Pegorin Brasil*, Ana Laura Destro Chagas, Ana Paula Macedo, Junia Ramos, João Paulo Mardegan Issa, Ankit Gangrade, Juliana Ferreira Floriano, Guilherme Ferreira Caetano, Bingbing Li, Neda Farhadi, Kalpana Mandal, Mehmet Remzi Dokmeci, Vadim Jucaud, Rondinelli Donizetti Herculano*, Antonio Carlos Shimano, 2022, “Latex-collagen Membrane: an Alternative Treatment for Tibial Bone Defects”. Journal of Materials Science (2021 Impact Factor: 4.682), Vol. 57, pp. 22019-22041.
  3. Betina Sayeg Burd*, Cassamo Ussemane Mussagy*, Junya de Lacorte Singulani, Jean Lucas Tanaka, Mateus Scontri, Giovana Sant’Ana Pegorin Brasil, Nayrim Brizuela Guerra, Patrícia Akemi Assato, Ana Paula De Sousa Abreu, Camila Calderan Bebber, Maíra Terra-Garcia, Juliana Campos Junqueira, Neda Farhadi, Ana Marisa Fusco Almeida, Maria José Soares Mendes Giannini, Bingbing Li, and Rondinelli Donizetti Herculano*, 2022, “Galleria Mellonella Larvae as an Alternative to Low-Density Polyethylene and Polystyrene Biodegradation”, Journal of Polymers and the Environment (2021 Impact Factor: 4.705).
  4. Chen Li, Shijie Bian, Tongzi Wu, Richard P. Donovan, and Bingbing Li*, 2022, “Affordable Artificial Intelligence-Assisted Machine Supervision System for Small and Medium-Sized Manufacturers”, Sensors (2021 Impact Factor: 3.847), Vol. 22 (16): 6246.
  5. Richard Donovan, Yoon Kim, Anthony J Manzo, Yutian Ren, Shijie Bian, Tongzi Wu, Shweta Purawat, Henry Helvajian, Marilee Wheaton, Bingbing Li, Guann-Pyng Li*, 2022, “Smart Connected Worker Edge Platform for Smart Manufacturing: Part 2: Implementation and On-site Deployment Case Study”, Journal of Advanced Manufacturing and Processing, Vol. 4 (4): e10130.
  6. Yoon Kim, Richard Donovan, Yutian Ren, Shijie Bian, Tongzi Wu, Shweta Purawat, Anthony Manzo, Ilkay Altintas, Bingbing Li, Guann-Pyng Li*, 2022, “Smart Connected Worker Edge Platform for Smart Manufacturing: Part 1: Architecture and Platform Design”, Journal of Advanced Manufacturing and Processing, Vol. 4 (4): e10129.
  7. Tianqi Zheng, Shuaihang Pan, Narayanan Murali, Bingbing Li, Xiaochun Li*, 2022, “Selective Laser Melting of Novel 7075 Aluminum Powders with Internally Dispersed TiC Nanoparticles”, Materials Letters (2021 Impact Factor: 3.574), Vol. 319: 132268.
  8. Elham Davoodi, Hossein Montazerian, Anooshe Sadat Mirhakimi, Masoud Zhianmanesh, Osezua Ibhadode, Shahriar Imani Shahabad, Reza Esmaeilizadeh, Einollah Sarikhani, Sahar Toorandaz, Shima Sarabi, Rohollah Nasiri, Yangzhi Zhu, Javad Kadkhodapour, Bingbing Li, Ali Khademhosseini*, Ehsan Toyserkani*, 2022, “Additively Manufactured Metallic Biomaterials”, Bioactive Materials (2021 Impact Factor: 16.874), Vol. 15, pp. 214-249.
  9. Shijie Bian, Chen Li, Yongwei Fu, Yutian Ren, Tongzi Wu, Guann-Pyng Li, Bingbing Li*, 2021, “Machine Learning-based Real-time Monitoring System for Smart Connected Worker to Improve Energy Efficiency”, Journal of Manufacturing Systems (2021 Impact Factor: 9.498), Vol. 61, pp. 66-76.
  10. Bingbing Li*, Bani Davod Hesar, Yiwen Zhao, and Li Ding, 2020, “Design and Additive Manufacturing of Porous Titanium Scaffolds for Optimum Cell Viability in Bone Tissue Engineering, Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture (2021 Impact Factor: 2.759).
  11. Lai Jiang*, Daniel Walczyk, Gavin McIntyre, Ronald Bucinell, and Bingbing Li, 2019, “Bioresin Infused then Cured Mycelium-based Sandwich-structure Biocomposites: Resin Transfer Molding (RTM) Process, Flexural Properties, and Simulation”, Journal of Cleaner Production (2021 Impact Factor: 11.072), Vol. 207, pp. 123-135.
  12. Lai Jiang*, Daniel Walczyk, and Bingbing Li, 2018, “Modeling of Glue Penetration into Natural Fiber Reinforcements by Roller Infusion”, Journal of Manufacturing Science and Engineering - Transactions of the ASME (2021 Impact Factor: 3.952), Vol. 140 (4): 041006.
  13. Mingsan Xu, Jibin Jiang, Bingbing Li*, Weilong Cong, and Dongdong Zhang, 2018, “Experimental Characterizations of Laser Cladding of Iron and Nickel Based Alloy Powders on Carbon Steel 1045 for Remanufacturing”, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2021 Impact Factor: 2.663), Vol. 232 (12), pp. 1023-1035.
  14. Lei Zhang, Haihong Huang*, Di Hu, Bingbing Li, and Cheng Zhang, 2016, “GHG Emissions Analysis of Manufacturing of The Hydraulic Press Slider Within Forging Machine in China”, Journal of Cleaner Production (2021 Impact Factor: 11.072), Vol. 113, pp. 565-576.
  15. Zhifeng Liu, Zeying Xu, Haihong Huang*, and Bingbing Li, 2016, "A Study of Waste Liquid Crystal Display Generation in Mainland China", Waste Management & Research (2021 Impact Factor: 4.432), Vol. 34 (1), pp. 58-66.
  16. Jingyi Zhang, Xianfeng Gao, Yelin Deng, Bingbing Li, and Chris Yuan*, 2015, “Life Cycle Assessment of Titania Perovskite Solar Cell Technology for Sustainable Design and Manufacturing", ChemSusChem (2021 Impact Factor: 9.140), Vol. 8 (22), pp. 3882-3891.
  17. Bingbing Li, Xianfeng Gao, Jianyang Li, and Chris Yuan*, 2014, “Life Cycle Environmental Impact of High Capacity Lithium Ion Battery with Silicon Nanowires Anode for Electric Vehicles”, Environmental Science & Technology (2021 Impact Factor: 11.357), Vol. 48 (5), pp. 3047-3055.
  18. Bingbing Li, Xianfeng Gao, Hong-Chao Zhang, and Chris Yuan*, 2014, “Energy Modeling of Electrochemical Anodization Process of Titanium Dioxide Nanotubes”, ACS Sustainable Chemistry & Engineering (2021 Impact Factor: 9.224), Vol. 2 (3), pp. 404-410.
  19. Bingbing Li*, Hong-Chao Zhang, Qingdi Ke, Li Ding, and Lei Zhang, 2012, “Overview of Energy Consumption Model for Manufacturing Processes”, Applied Mechanics and Materials, Vol. 130-134, pp. 2288-2293.
  20. Qingdi Ke*, Hong-Chao Zhang, Guangfu Liu, and Bingbing Li, 2012, “Energy Factor Analysis in Modular Product”, Applied Mechanics and Materials, Vol. 130-134, pp. 1314-1317.
  21. Bingbing Li*, Hong-Chao Zhang, Derrick Tate, Li Ding, and Lei Zhang, 2011, “Sparse Principal Component Analysis Based Sustainability Assessment of EOL ICT Service Infrastructures”, International Journal Environmental Technology and Management, Vol. 14 (5-6), pp. 435-451.
  22. Zhifeng Liu, Di Hu*, and Bingbing Li, 2011, “Model and Solution to The Product Disassembly Sequence Planning”, International Journal Environmental Technology and Management, Vol. 14 (5-6), pp.501-515.
  23. Lei Zhang*, Yang Zhan, Zhifeng Liu, Hong-Chao Zhang, and Bingbing Li, 2011, “Development and Analysis of Design for Environment Oriented Design Parameters”, Journal of Cleaner Production (2021 Impact Factor: 11.072), Vol. 19 (15), pp. 1723-1733.
  24. Yang Gao*, Zhifeng Liu, Haihong Huang, and Bingbing Li, 2008, “The Research of Green Products Assessment Method Based on Weighting MET Matrix”, Machine Design and Research, Vol. 24 (3), pp. 10-14.
  25. Shuguang Ding*, Guohua Ni, and Bingbing Li, 2005, “Application and Research of Embedded μC/OS2II System in the Numerical Control System”, Modular Machine Tool & Automatic Manufacturing Technique, Vol. 10, pp. 51-55.

 

Conference Papers

  1. Donald Palomino, Shijie Bian, Pedro Salcedo, Erick Navarro, Bharath Gopalaiah, Richard Otis, Bingbing Li*, “AI-powered Augmented Reality Training for Metal Additive Manufacturing”, Proceedings of 33rd Annual International Solid Freeform Fabrication Symposium (SFF Symposium 2022), Austin, Texas, U.S.A., July 25-27, 2022.
  2. Paula Logozzo, Donald Palomino, Abraham Meiszner, Bodia Borijin, Andrew Wang, Ryan Watkins, Bingbing Li*, “Generative Design for Additive Manufacturing of Satellite Optical Tracker Mount”, Proceedings of 33rd Annual International Solid Freeform Fabrication Symposium (SFF Symposium 2022), Austin, Texas, U.S.A., July 25-27, 2022.
  3. Runrun Chen, Axel Fernandes, Changyu Ma, Shuyi Huang, Shiqi Zheng, Natan Barros, Nhut Ho, Bingbing Li*, “Surface Polishing for Additively Manufactured Titanium Bone Scaffolds to Improve Osseointegration”, Proceedings of 33rd Annual International Solid Freeform Fabrication Symposium (SFF Symposium 2022), Austin, Texas, U.S.A., July 25-27, 2022.
  4. Shijie Bian, Daniele Grandi, Kaveh Hassani, Elliot Sadler, Bodia Borijin, Axel Fernandes, Andrew Wang, Thomas Lu, Richard Otis, Nhut Ho, Bingbing Li*, “Material Prediction for Design Automation Using Graph Representation Learning”, Proceedings of the ASME 2022 International Design Engineering Technical Conferences &Computers and Information in Engineering Conference (IDETC/CIE 2022), St. Louis, Missouri, U.S.A., August 14-17, 2022.
  5. Patricia Maloney*, Weilong Cong, Meng Zhang, and Bingbing Li, “The Cumulative Effects of an NSF-Funded Additive Manufacturing Course at Three Large State Universities and Their Surrounding Communities”, Proceedings of the ASEE’s 129th Annual Conference & Exposition (ASEE 2022), Minneapolis, Minnesota, June 26-29, 2022.
  6. Shijie Bian, Tiancheng Lin, Chen Li, Yongwei Fu, Mengrui Jiang, Tongzi Wu, Xiyi Hang, Bingbing Li*, “Real-time Object Detection for Smart Connected Worker in 3D printing”, Proceedings of the 2021 International Conference on Computational Science (ICCS 2021), Krakow, Poland, June 16-18, 2021.
  7. Patricia Maloney*, Weilong Cong, Meng Zhang, and Bingbing Li, “The Broader Impacts of an Additive Manufacturing Course at Three Large Universities”, Proceedings of the ASEE’s 127th Annual Conference & Exposition, Montreal, Quebec, Canada, June 21-24, 2020.
  8. Haihong Huang, and Bingbing Li*, “Optimization of WEEE Recycling Network for E-wastes based on Discrete Event Simulation”, Procedia CIRP, Vol. 90, pp. 705-711. The 27th CIRP International Conference on Life Cycle Engineering (LCE 2020), Grenoble, France, May 13-15, 2020.
  9. Patricia Maloney*, Weilong Cong, Meng Zhang, and Bingbing Li,Assessing the Results of an Additive Manufacturing Course at Three Large Universities on Undergraduates and High School Students”, Proceedings of the ASEE’s 126th Annual Conference & Exposition, Tampa, Florida, U.S.A., June 16-19, 2019.
  10. Mingsan Xu, Simo Liu, Mingliang Mei, and Bingbing Li*, “Effect of Cooling Modes on Microstructure and Mechanical Properties of Cr18Ni8Mo2Si Cladding to 40Cr by Laser Cladding Technology”, Proceedings of ASME 2019 14th International Manufacturing Science and Engineering Conference (MSEC 2019), Erie, Pennsylvania, U.S.A., June 10-14, 2019.
  11. Patricia Maloney, Bingbing Li*, Meng Zhang, Weilong Cong, “Creating and Assessing an Upper Division Additive Manufacturing Course and Laboratory to Enhance Undergraduate Research and Innovation”, Proceedings of the ASEE’s 125th Annual Conference & Exposition, Salt Lake City, Utah, U.S.A., June 24-27, 2018.
  12. Mingsan Xu, Kerstern Malama, and Bingbing Li*, “Influence of Curvature Radius of 40Cr on Mechanical Properties of Laser Cladding Layer”, Proceedings of ASME 2018 13th International Manufacturing Science and Engineering Conference (MSEC 2018), College Station, Texas, U.S.A., June 18-22, 2018.
  13. Bingbing Li*, Li Ding, Mark Rajai, Di Hu, and Shengzi Zheng, “Backtracking Algorithm-based Disassembly Sequence Planning”, Procedia CIRP, Vol. 69, pp.932-937. The 25th CIRP International Conference on Life Cycle Engineering (LCE 2018), Copenhagen, Denmark, April 30-May 2, 2018.
  14. Juan Xing, Xianli Luo, Juliana Bermudez, Matthew Moldthan, and Bingbing Li*, “3D Bioprinting of Scaffold Structure Using Micro-extrusion Technology”, Proceedings of 28th Annual International Solid Freeform Fabrication Symposium (SFF Symposium 2017), Austin, Texas, U.S.A., August 7-9, 2017.
  15. Daniel Aguiar, Amanda Albuquerque, and Bingbing Li*, “3D Inkjetting Droplet Formation of Bacterial Cellulosic Exopolysaccharide Gel”, Proceedings of 27th Annual International Solid Freeform Fabrication Symposium (SFF Symposium 2016), Austin, Texas, U.S.A., August 8-10, 2016.
  16. Jibin Jiang, Guofu Lian, Mingsan Xu, Chunyu Li, Bingsan Chen, and Bingbing Li*, “Influence of Preheating Temperature on Mechanical Properties of Laser Cladding Layer”, Proceedings of ASME 2016 11th International Manufacturing Science and Engineering Conference (MSEC 2016), Blacksburg, Virginia, U.S.A., June 27-July 1, 2016.
  17. Bingbing Li*, Robert G. Ryan, Nancy Warter-Perez, Yong Gan, Hadil Mustafa, Helen Cox, and Li Ding, “Vertical Integration of the Liberal Arts in Engineering Education”, Proceedings of the ASEE’s 123rd Annual Conference & Exposition, New Orleans, Louisiana, U.S.A., June 26-29, 2016.
  18. Qingdi Ke, Hui Wang*, Shouxu Song, and Bingbing Li, “A Timing Decision-making Method for Product and Its Key Components in Proactive Remanufacturing”, Procedia CIRP, Vol. 48, pp.182-187. The 23rd CIRP International Conference on Life Cycle Engineering (LCE 2016), Berlin, Germany, May 22-24, 2016.
  19. Bingbing Li*, S. Jimmy Gandhi, and Li Ding, “Curriculum Design for Sustainability of Global Integrated Macro-nano Manufacturing”, Proceedings of the ASEE’s 122nd Annual Conference & Exposition, Seattle, Washington, U.S.A., June 14-17, 2015.
  20. Bingbing Li*, Hong-Chao Zhang, and Chris Yuan, “Thermodynamic Analysis of Titanium Dioxide Nanotube Synthesis Process for Sustainability Improvement”, Proceedings of ASME 2015 10th International Manufacturing Science and Engineering Conference (MSEC 2015), Charlotte, North Carolina, U.S.A., June 8-12, 2015.
  21. Mingsan Xu, Jianfeng Li, Jibin Jiang, and Bingbing Li*, “Influence of Powders and Process Parameters on Bonding Shear Strength and Micro Hardness in Laser Cladding Remanufacturing”, Procedia CIRP, Vol. 29, pp. 804-809. The 22nd CIRP International Conference on Life Cycle Engineering (LCE 2015), Sydney, Australia, April 7-9, 2015.
  22. Bingbing Li, Jianyang Li, and Chris Yuan*, “Life Cycle Assessment of Lithium Ion Batteries with Silicon Nanowire Anode for Electric Vehicles”, Proceedings of the 2013 IEEE International Symposium on Sustainable Systems & Technology (ISSST 2013), Cincinnati, Ohio, U.S.A., May 15-17, 2013.
  23. Fan Yang, Bingbing Li, and Chris Yuan*, “Geographical Differences of Electricity Supply in Environmental Impact Assessment of Electric Vehicles”, Proceedings of the SAE 2013 World Congress, Detroit, Michigan, U.S.A., April 16-18, 2013.
  24. Qingdi Ke*, Hong-Chao Zhang, Guangfu Liu, and Bingbing Li, “Remanufacturing Engineering Literature Overview and Future Research Needs”, Proceedings of the 18th CIRP International Conference on Life Cycle Engineering (LCE 2011), Braunschweig, Germany, May 2-4, 2011.
  25. Qingdi Ke*, Hong-Chao Zhang, Guangfu Liu, and Bingbing Li, “Energy-saving Optimal Design Based on Transfer Function”, Proceedings of the 17th CIRP International Conference on Life Cycle Engineering (LCE 2010), Hefei, China, May 19-21, 2010.
  26. John Carrell*, Hong-Chao Zhang, Derrick Tate, Chengcheng Fan, and Bingbing Li, “Design and Analysis of Shape Memory Polymer Snap-fits for Active Assembly”, Proceedings of the 17th CIRP International Conference on Life Cycle Engineering (LCE 2010), Hefei, China, May 19-21, 2010.
  27. Xueqing Qian, Hong-Chao Zhang, and Bingbing Li*, “An Surplus Asset Management Model for Environmental Impact Analysis of EOL Electronic Products”, Proceedings of ASME 2009 4th International Manufacturing Science and Engineering Conference (MSEC 2009), West Lafayette, Indiana, U.S.A, October 4-7, 2009, pp.127-133.
  28. Zhifeng Liu, Bingbing Li*, Haihong Huang, and Hong-Chao Zhang, “Research on Quantitative Assessment Methods of Environmental Performance in Green Design”, Proceedings of the 15th CIRP International Conference on Life Cycle Engineering (LCE 2008), Sydney, Australia, March 17-19, 2008, pp.136-141.
  29. Bingbing Li*, Lei Zhang, Zhifeng Liu, and Lianshe Bai, “Refrigerator Drop Test Simulation and Its Key Factors Research Based on Explicit Formulation Algorithm”, Proceedings of the 5th China Household Electrical Appliance Technology Conference, Ningbo, China, November 21~23, 2006, pp.259-564. (Excellent paper)
  30. Lei Zhang*, Jun Wang, Zhifeng Liu, Bingbing Li, and Haihong Huang, “Research on Assessment Index System of Green Design based on Recycle Economy”, Proceedings of Yangtze River Delta Zone Cycle Economic Forum, Hefei, China, July 2006, pp.516-519.

 

Symposium Posters/Oral Presentations without Paper

  1. Tianqi Zheng, Shiqi Zheng, Jingke Liu, Bingbing Li, Xiaochun Li*, “Laser Powder Bed Fusion of Nanoparticles-Enabled High-Zinc Al-Zn-Mg-Cu Alloys”, 2023 TMS Annual Meeting & Exhibition, San Diego, California, U.S., March 19-23, 2023. (Oral)
  2. Tianqi Zheng, Shuaihang Pan, Bingbing Li, Xiaochun Li*, “Selective Laser Melting of Novel 7075 Aluminum Alloy with Internally Dispersed Nanoparticles”, 2022 TMS Annual Meeting & Exhibition, Anaheim, California, U.S.A., February 27-March 3, 2022. (Oral)
  3. Siyuan Li, Arthur Li, Matthew Moldthan, and Bingbing Li*, “Printability evaluation of 3D bioprinted MIA PaCa-2 human pancreatic cancer model”, 2020 CSU Interdisciplinary Cancer Meeting (CSU-ICM), Northridge, California, U.S.A., November 6, 2020. (Oral)
  4. Matthew Moldthan, Henry Luong, Alexander Boyd, and Bingbing Li*, “Cancer cell migration within 3D layer-by-layer microfabricated photocrosslinked PEG scaffolds”, CSUPERB’s 32nd Annual CSU Biotechnology Symposium, Santa Clara, California, U.S.A., January 16-18, 2020.  (Poster)
  5. Bani Hesar, Yiwen Zhao, Jibin Jiang, and Bingbing Li*, “Design and Additive Manufacturing of Titanium Porous Scaffolds for Optimum Cell Viability in Bone Tissue Engineering”, 40th International MATADOR Conference on Advanced Manufacturing, Hangzhou, China, July 8-10, 2019. (Oral)
  6. Ryan Meza, Yiwen Zhao, and Bingbing Li*, “Effects of DOD Piezoelectric 3D Bioprinting on the Cell Viability in Hydrogels”, 40th International MATADOR Conference on Advanced Manufacturing, Hangzhou, China, July 8-10, 2019. (Poster)
  7. Ryan Meza, and Bingbing Li*, “Effects of DOD Piezoelectric 3D Bioprinting on the Printability of Hydrogels”, CSUPERB’s 31st Annual CSU Biotechnology Symposium, Orange County, California, U.S.A., January 3-5, 2019. (Poster)
  8. Christian Sotelo, Jose Olmedo, Matthew Moldthan, and Bingbing Li*, “Topological Design and Additive Manufacturing of Porous Metals for Bone Implant”, CSUPERB’s 31st Annual CSU Biotechnology Symposium, Orange County, California, U.S.A., January 3-5, 2019. (Poster)
  9. Ryan Meza, and Bingbing Li*, “Cell Viability of DOD Bioprinting on the Formability of Microspheres”, 2018 CSU Interdisciplinary Cancer Meeting (CSU-ICM), Northridge, California, U.S.A., November 6, 2018. (Oral and Poster, Best Undergraduate Talk Award)
  10. Ryan Meza, Matthew Moldthan, Siyi Niu, and Bingbing Li*, “Effects of DOD Bioprinting on the Formability of Microspheres”, 19th Annual UC Systemwide Bioengineering Symposium, Riverside, California, U.S.A., June 21-23, 2018. (Poster)
  11. Juliana Bermudez, Cameron Davis, Ethan Banton, Fhid Alemtairy, Abdullah Alsulaiman, Ahima Saxena, Yiwen Zhao, and Bingbing Li*, “Biological Digital Light 3D-Printer (3-BioDP)”, SME AeroDef Manufacturing Conference, Long Beach, California, March 27-28, 2018. (Poster)
  12. Micah Feras, Nathalie Pham, Ria Regi, Diego Barreto, and Bingbing Li*, “Micro Extrusion based 3D Bioprinting of Log-pile Scaffold”, Great Minds in STEM™ (GMiS) 29th Annual HENAAC Conference, Pasadena, California, U.S.A., October 18-22, 2017. (Poster)
  13. Juliana Bermudez, Ryan Meza, and Bingbing Li*, “Drop-on-Demand Inkjet Printing of Bacterial Cellulosic Exopolysaccharide Gel Containing Living Cells”, 18th Annual UC Systemwide Bioengineering Symposium, Los Angeles, California, U.S.A., June 28-30, 2017. (Poster)
  14. Christian Sotelo, Hamza Hamid, and Bingbing Li*, “Cranio-Maxillofacial Implants Manufactured via Selective Laser Melting 3D Printing Processes”, 18th Annual UC Systemwide Bioengineering Symposium, Los Angeles, California, U.S.A., June 28-30, 2017. (Poster)
  15. Christian Sotelo, Beneil Eisavi, and Bingbing Li*, “Customized Orthodontic Brackets Created by Selective Laser Melting Process for Orthodontic Treatment”, 21st Annual Student Research and Creative Works Symposium (CSUNposium 2017), Northridge, California, U.S.A., April 7, 2017. (Poster)
  16. Xianli Luo, Juliana Bermudez, Ryan Meza, and Bingbing Li*, “3D Bioprinting of Aneurysm Blood Vessel”, 21st Annual Student Research and Creative Works Symposium (CSUNposium 2017), Northridge, California, U.S.A., April 7, 2017. (Poster)
  17. Daniel Aguiar, Juliana Bermudez, Paulo Yu, Vibhav Durgesh, and Bingbing Li*, “3D Bioprinting of Aneurysm Blood Vessel and its Fluid Dynamic Analysis”, CSUPERB’s 29th Annual CSU Biotechnology Symposium, Santa Clara, California, U.S.A., January 5-7, 2017. (Poster)
  18. Hyunjin Kim, and Bingbing Li*, “Life Cycle Assessment of Emerging Energy Storage for Utility-Scale Deployment”, California Renewable Energy and Storage Technology Conference 2016 (CREST 2016), Northridge, California, U.S.A., November 12, 2016. (Poster)
  19. Fayez Hamed Alharbi, and Bingbing Li*, “Fabrication of Artificial Skin by inkjet Bioprinting”, 2016 Annual International Solid Freeform Fabrication Symposium (SFF 2016), Austin, Texas, U.S.A., August 8-10, 2016. (Poster)
  20. Bingbing Li*, and Daniel Aguiar, “Customized Vascular Structures Created by Inkjet 3D Printing for Tissue Engineering”, CSUPERB’s 28th Annual CSU Biotechnology Symposium, Garden Grove, California, U.S.A., January 7-9, 2016. (Oral and Poster)
  21. Bingbing Li*, Hong-Chao Zhang, and Qingdi Ke, “Energy Model for Manufacturing Process: A Case Study of Wind Turbine”, 2010 IEEE International Symposium on Sustainable Systems & Technology (ISSST 2010), Arlington, Virginia, U.S.A, May 17-19, 2010. (Poster)

* Corresponding author